Additional Radio settings
Selecting one of the 6 buttons on the Radio Setup screen will take you to one of the additional setting screens below.
Many of the additional settings here are self-explanatory. Only those settings needing clarification will be mentioned below.
Sound
Mode - configures when to play sounds.
All - Beeps when the buttons are pressed and sounds are played when there are alerts or warnings.
No Key - No beeps when buttons are pressed or the scroll wheel is turned but does play sounds when there are alerts or warnings. Also plays sounds triggered by special functions.
Alarm - Only plays alarm or warning sounds. Also plays sounds triggered by special functions.
Quiet - No Beeps or sounds are played.
Volume
The master volume for the radio.
Wav volume
The volume for alerts and warnings and sounds that are played with the Play track special function
Background volume
The volume for background .wav files (music) that are played with the BGMusic special function
Variometer
Repeat Zero
The time before the tone repeats in milliseconds.
Note: In order for the variometer to function, it must be turned on via the Vario special or global function. See Special Functions for more information on how to configure this.
Haptic
Mode - configures when the radio vibrates.
All - Vibrates when the buttons are pressed and when there are alerts or warnings.
No Key - No vibrations when buttons are the pressed or scroll wheel is turned but does vibrate when there are alerts or warnings.
Alarm - Only vibrates for alarms or warning sounds.
Quiet - No vibrations are made.
Alarms
Sound Off
An "alarms disabled" visual warning is displayed when the transmitter is turned on if the sound mode is set to quiet.
Check RSSI on Shutdown
Checks if a receiver is still connected to the radio on attempted shutdown. Makes a audio and visual alert if one is detected.
Backlight
Mode
Off – Always off.
Keys – Turns on when buttons are pressed.
Ctrl – Turns on when sticks, switches, and knobs are used.
Both – Turns on when buttons, sticks, switches, and knobs are used.
ON – Always on.
Time
The length in seconds that the backlight is on. The minimum value is 5 seconds. The maximum value is 600 seconds.
Alarm
The backlight turns on when there are alarms or warnings.
GPS
The GPS configuration settings are only for when a GPS has been installed on the radio, not the model's GPS.
Coordinate Format
The GPS coordinate format that will be displayed.
Adjust RTC
Adjust the transmitter's real-time clock to match the time determined by the GPS.
Last updated
