EdgeTX User Manual
EdgeTX Knowledge Base
EdgeTX Knowledge Base
  • EdgeTX User Manual v2.8
  • EdgeTX User Manual
    • User Manual for Color Screen Radios
      • User Interface
      • Select Model
      • Model Settings
        • Model Setup
          • Internal / External RF
          • Trainer
          • Timer 1/2/3
          • Preflight Checks
          • Trims
          • Throttle
        • Heli Setup
        • Flight Modes
        • Inputs, Mixes & Outputs
          • Inputs
          • Mixes
          • Outputs
        • Curves
        • Global Variables
        • Logical Switches
        • Special Functions
        • Telemetry
          • Sensor Configuration Options
          • Common Telemetry Sensors
      • Radio Settings
        • Tools
        • SD Card
        • Radio Setup
          • Additional Radio settings
        • Themes
        • Global Functions
        • Trainer
        • Hardware
        • Version
      • Screen Settings
        • Widgets
      • Channel Monitor
      • Reset Telemetry
      • Statistics
  • User Manual for Monochrome Screen Radios
    • User Inteface
    • Main View
      • Reset
      • Statistics
    • Model Settings
      • Setup
      • Heli Setup
      • Flight Modes
      • Inputs, Mixes & Outputs
        • Inputs
        • Mixes
        • Outputs
      • Curves
      • Logical Switches
      • Special Functions
      • Telemetry
        • Sensor Configuration
        • Common Telemetry Sensors
      • Display
    • Radio Settings
      • SD Card
      • Radio Setup
      • Global Functions
      • Trainer
      • Hardware
      • Version
  • Translated User Manuals
  • EdgeTX: How-To
    • Contribute to the User Manual
    • Update from OpenTX to EdgeTX
    • 🚧Set-up wireless trainer with MPM
  • EdgeTX Companion
    • 🚧Companion User Manual
  • More
    • Additional Resources
    • Contributors
Powered by GitBook
On this page
Export as PDF
  1. EdgeTX User Manual
  2. User Manual for Color Screen Radios
  3. Radio Settings

Version

PreviousHardwareNextScreen Settings

Last updated 2 years ago

The Version screen displays information about the current EdgeTX version that is being used:

  • FW - Firmware name

  • VERS - Firmware version

  • DATE - Date firmware was compiled

  • TIME - Time firmware was compiled

  • OPTS - Build options that were enabled when compiled.

The Modules / RX Version gives you information about the activated RX modules for the currently selected model.

A complete list of build options can be found here:

https://github.com/EdgeTX/edgetx/wiki/Compilation-options
Version screen
Modules / RX Version screen