EdgeTX User Manual
v2.9
v2.9
  • EdgeTX User Manual v2.9
  • EdgeTX User Manual
    • Summary of changes since v2.8
    • Installing and Updating EdgeTX
      • Migrate from OpenTX to EdgeTX using EdgeTX Buddy
      • Migrate from OpenTX to EdgeTX using the Bootloader
      • Update from an earlier version of EdgeTX using EdgeTX Buddy
      • Update from an earlier version of EdgeTX using the Bootloader
    • User Manual for Color Screen Radios
      • User Interface
      • Manage Models
      • Model Settings
        • Model Setup
          • Internal / External RF
          • Trainer
          • Timer 1/2/3
          • Preflight Checks
          • Trims
          • Throttle
          • Enabled Features
          • USB Joystick
        • Heli Setup
        • Flight Modes
        • Inputs, Mixes & Outputs
          • Inputs
          • Mixes
          • Outputs
        • Curves
        • Global Variables
        • Logical Switches
        • Special Functions
        • Telemetry
          • Sensor Configuration Options
          • Common Telemetry Sensors
      • Radio Settings
        • Tools
        • SD Card
        • Radio Setup
          • Additional Radio settings
        • Themes
        • Global Functions
        • Trainer
        • Hardware
        • Version
      • Screen Settings
        • Widgets
      • Channel Monitor
      • Reset Telemetry
      • Statistics
  • User Manual for Monochrome Screen Radios
    • User Inteface
    • Main View
      • Reset
      • Statistics
    • Model Settings
      • Setup
      • Heli Setup
      • Flight Modes
      • Inputs, Mixes & Outputs
        • Inputs
        • Mixes
        • Outputs
      • Curves
      • Logical Switches
      • Special Functions
      • Telemetry
        • Sensor Configuration
        • Common Telemetry Sensors
      • Display
    • Radio Settings
      • SD Card
      • Radio Setup
      • Global Functions
      • Trainer
      • Hardware
      • Version
  • Translated User Manuals
  • EdgeTX: How-To
    • Contribute to the User Manual
    • Set-up wireless trainer with a Multi -protocol module
    • Use Bluetooth with EdgeTX
  • EdgeTX Companion
    • 🚧Companion User Manual
  • More
    • Additional Resources
    • Contributors
Powered by GitBook
On this page
Export as PDF
  1. EdgeTX User Manual
  2. User Manual for Color Screen Radios
  3. Model Settings
  4. Model Setup

Throttle

PreviousTrimsNextEnabled Features

Last updated 2 years ago

EdgeTX has to possibility to select a specific source and trim for the model throttle and allows for the following configuration options:

Reverse: When enabled, this option reverses the output direction of the configured throttle channel.

Source: The source that will be used for the throttle.

Trim idle only: When enabled, the throttle trim will only affect the bottom portion of the throttle band.

For example, with Trim idle only enabled, the throttle stick at the lowest point might have a value of -80 and the center point will still be 0 and the highest point of 100. Without this enabled, the throttle stick at the lowest point might have a value of -80 however, the center point will be 20 and the highest point of 100.

Trim switch: The trim switch that will be used to trim the throttle. It is possible to substitute the throttle trim switch with the aileron, rudder, or elevator trim switches.

Throttle page settings