EdgeTX User Manual
v2.9
v2.9
  • EdgeTX User Manual v2.9
  • EdgeTX User Manual
    • Summary of changes since v2.8
    • Installing and Updating EdgeTX
      • Migrate from OpenTX to EdgeTX using EdgeTX Buddy
      • Migrate from OpenTX to EdgeTX using the Bootloader
      • Update from an earlier version of EdgeTX using EdgeTX Buddy
      • Update from an earlier version of EdgeTX using the Bootloader
    • User Manual for Color Screen Radios
      • User Interface
      • Manage Models
      • Model Settings
        • Model Setup
          • Internal / External RF
          • Trainer
          • Timer 1/2/3
          • Preflight Checks
          • Trims
          • Throttle
          • Enabled Features
          • USB Joystick
        • Heli Setup
        • Flight Modes
        • Inputs, Mixes & Outputs
          • Inputs
          • Mixes
          • Outputs
        • Curves
        • Global Variables
        • Logical Switches
        • Special Functions
        • Telemetry
          • Sensor Configuration Options
          • Common Telemetry Sensors
      • Radio Settings
        • Tools
        • SD Card
        • Radio Setup
          • Additional Radio settings
        • Themes
        • Global Functions
        • Trainer
        • Hardware
        • Version
      • Screen Settings
        • Widgets
      • Channel Monitor
      • Reset Telemetry
      • Statistics
  • User Manual for Monochrome Screen Radios
    • User Inteface
    • Main View
      • Reset
      • Statistics
    • Model Settings
      • Setup
      • Heli Setup
      • Flight Modes
      • Inputs, Mixes & Outputs
        • Inputs
        • Mixes
        • Outputs
      • Curves
      • Logical Switches
      • Special Functions
      • Telemetry
        • Sensor Configuration
        • Common Telemetry Sensors
      • Display
    • Radio Settings
      • SD Card
      • Radio Setup
      • Global Functions
      • Trainer
      • Hardware
      • Version
  • Translated User Manuals
  • EdgeTX: How-To
    • Contribute to the User Manual
    • Set-up wireless trainer with a Multi -protocol module
    • Use Bluetooth with EdgeTX
  • EdgeTX Companion
    • 🚧Companion User Manual
  • More
    • Additional Resources
    • Contributors
Powered by GitBook
On this page
Export as PDF
  1. EdgeTX User Manual
  2. User Manual for Color Screen Radios
  3. Model Settings

Heli Setup

PreviousUSB JoystickNextFlight Modes

Last updated 2 years ago

The Heli Setup page in Model Settings is an optional page that is available on custom-compiled versions of EdgeTX. The heli setup page is often used for collective pitch mixing (CCPM) used in flybared helicopters where the receiver directly controls the swashplate servos. Most flybarless helicopters do not need to configure this page. The outputs of the CCPM mixer are CYC1, CYC2, and CYC3, which need to be assigned to an output channel on the Mixes screen.

The heli setup page has the following configuration options:

  • Swash Type - Swash type for your model. Options are 120, 120x, 140, and 90.

  • Swash Ring - Set the swash ring limit only as needed. 1 = maximum limit -> 100 or 0 = no limit.

  • Long. cyc. source - Select source input.

  • Lateral cyc.source -Select source input.

  • Coll. pitch source - Select source input.

  • Weight - Percentage value of the stick travel to use.

Heli Setup page