# Summary of changes since v2.8 Below is a summary of changes that affect the user interface and/or how EdgeTX functions. It does not cover all bug fixes. For a complete list of changes (including bug fixes), please read the release notes. ### **Color Screen Radios** * General Changes * LVGL conversion of all pages is now complete. * Adjusted padding and spacing on many pages and buttons for a better look. * No more on-radio model conversions from .otx format. Users migrating from OpenTX will need to import their models to EdgeTX Companion. See [EdgeTX Migration guide](/v2.9/edgetx-user-manual/installing-and-updating-edgetx/update-from-opentx-to-edgetx.md) for instructions how to migrate from OpenTX to EdgeTX. * Only SD card is mapped to device in USB Storage Mode. * [User interface page](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/user-interface.md) * Long press the **\[SYS]** button to go to the Radio Setup page. * [Model Select page](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/select-model.md) * Now named **Manage Models** instead of **Model Select.** * **Edit Labels** option is now called **Label Models** * Added **model quick select**. When enabled in [radio settings](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/radio-settings.md), this feature allows you to select a model as active model in the manage model screen by ***double tapping*** on it. * [Model Setup](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup.md) * Removed the **Use Global Functions** setting. Global functions are now disabled when the tab is hidden via the **Enabled Features** option. * [External RF](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/internal-external-rf.md) * Added mode **R9M ACCESS** to enable R9M Access Mod. Compilation option is no longer needed. * PPM Frames automatically adjust based on number of configured channels * [Trainer](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/trainer.md) (Model Setup) * PPM Frames automatically adjust based on number of configured channels * [Timers](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/timer-1-2-3.md) * Added **Beeps & Haptic** and **Voice & Haptic** as options for countdown option * [Enabled Features](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/enabled-features.md) * New section in Model Setup - allows you to configure which tabs are visible in the selected model's radio setup and model settings area of EdgeTX. * [USB Joystick](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/usb-joystick.md) * New section in Model Setup - allows users to select between Classic and Advaced Mode. * Adds advanced joystick configuration options in **Advanced Mode**. * [Flight Modes](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/flight-modes.md) * New screen layout to allow better overview of configured flight modes. * [Inputs ](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/inputs-mixes-and-outputs/inputs.md) * New screen layout, only shows configured inputs. * New **+** button to add additional inputs. * [Curves](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/curves.md) * Updated screen layout * Moving the control sticks will update the stick position on the curve in real time. * [Logical switches](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/logical-switches.md) * Updated screen layout * [Special Functions](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/special-functions.md) * New screen layout, only shows configured special functions * New + button to add special functions * ***Lua Script*** function adds **repeat** option * Added **Audio Amp Off** - Disables the Audio Amplifier so that no sound comes from the speaker, including annoying feedback or interferance. This option is only available on select radios. * [Telemetry](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/telemetry.md) * Updated screen layout * Added option to Show Instance ID On/Off * [SD Card](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/radio-settings/sd-card.md) * Added OTA flashing for FrSky X10s & X12s receivers for transmitters with internal ISRM/Access modules. * [Radio Setup](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/radio-settings/radio-setup.md) * Added **Enabled Features** settings to configure the ***Global*** ***settings*** for which tabs are visible in the Radio Setup and Model Settings area of EdgeTX. * Added **model quick select** configuration option. When enabled, this feature allows you to select a model as active model in the manage model screen by double tapping on it. * Image and Sound folders limited to 799 files each. If the folders contain more than 799 files, the file selection dropdown in model settings will not work properly. This is a limitation of LVGL. * [Trainer](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/model-settings/model-setup/trainer.md) (Radio Settings) * Changed mode options from **+=** and **:=** to **Replaced** and **Add** for easier configuration. * [Hardware ](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/radio-settings/hardware.md) * Updated debug analog screen and touch screen response. * Added **External module** option to Aux1 and Aux2 to enable configuring R9M Access Mod in Model Settings. * Added **Mute if no sound** option - puts the transmitter in mute mode until a sound needs to be played. This prevents interference noise from high-powered TX modules from coming out of the transmitter speakers. * [Screen Settings](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/screen-settings.md) * Added 4x2B screen layout. * Increased the max views from 5 to 10. * [Widgets](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/screen-settings/widgets.md) * **Value** widget added align left, center, right option for label and value. * **Text** widget added align left, center, right option for label and value. * Added **Value2** widget to display telemetry data better. * All widgets are now sorted alphabetical by name. * Updated color picker for widgets, can select system theme colors. Colors are not applied until saved. * Alerts * Alerts now display a "press any key" prompt. * Long press of the touchscreen can close an alert. * All buttons can be used to close an alert. Buttons will not open other UI pages over the alert. * [Channel Monitor](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/channel-monitor.md) * Logical switch page updated * [Statistics](/v2.9/edgetx-user-manual/user-manual-for-color-screen-radios/statistics.md) * Small changes to labels on debug page. * Languages * Added Hebrew language support. * New Hardware Support * Flysky FRM303 Support (External RX Module) * Segger RTT debug support * FrSky ARCHER PLUS R10+ and SR10+ receiver (v2.9.2) ### Monochrome Screen Radios * General Changes * No more on-radio model conversions from .otx format. Users migrating from OpenTX will need to import their models to EdgeTX Companion. See [EdgeTX Migration guide](/v2.9/edgetx-user-manual/installing-and-updating-edgetx/update-from-opentx-to-edgetx.md) for instructions how to migrate from OpenTX to EdgeTX. * Only SD card is mapped to device in USB Storage Mode. * [Main View](/v2.9/b-and-w-radios/main-view.md) * Added clock to main view pages. * [Model Settings](/v2.9/b-and-w-radios/model-select.md) * Timer configuration options are hidden when timer is set to **Off**. * Throttle configuration options are hidden in collapsible menu. * Preflight Checklist configuration options are hidden in collapsible menu. * Added **Enabled Features** option - allows you to configure which pages are visible in the selected model's radio setup and model settings area of EdgeTX; configuration options are hidden in collapsible menu. * Adds **USB Joystick** mode- allows users to select between Classic and Advaced Mode; adds advanced joystick configuration options when in **Advanced Mode**. * Added Bluetooth trainer mode with FrSky bluetooth module. * PPM Frames automatically adjust based on number of configured channels * Removed the **Glob. Funcs** setting. Global functions are now disabled when the tab is hidden via the enabled features option. * [Telemetry](/v2.9/b-and-w-radios/model-select/telemetry.md) * **RSSI Source** option was removed - set to "default" permanently * Updated screen layout * Added option to show instance ID On/Off * Added collapsible sensor list * [Special Functions](/v2.9/b-and-w-radios/model-select/special-functions.md) * ***Lua Script*** function adds repeat option. * Added **Audio Amp Off** - Disables the Audio Amplifier so that no sound comes from the speaker, including annoying feedback or interferance. This option is only available on select radios. * [Display](/v2.9/b-and-w-radios/model-select/display.md) * Added clock to Telemetry screens. * On the Telemetry screens, the top bar will only show the model name, radio battery voltage, and time in addition to the configured cells. If ***Timer1*** is configured in the model, then it will ***replace the model name*** in the top bar. * [Radio Setup](/v2.9/b-and-w-radios/radio-settings/radio-setup.md) * **Rx channel ord** option renamed to **Def Chan Ord** for better understanding. * [Hardware](/v2.9/b-and-w-radios/radio-settings/hardware.md) * **Audio Mute** option added - puts the transmitter in mute mode until a sound needs to be played. This prevents interference noise from high-powered TX modules from coming out of the transmitter speakers. * Language * Added Hewbrew language support. * New Hardware Support * RadioMaster Boxer * Flysky FRM303 Support (External RX Module) * Flysky digital gimbal support for Radio Master Boxer * Segger RTT debug support * FrSky ARCHER PLUS R10+ and SR10+ receiver (v2.9.2) --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://manual.edgetx.org/v2.9/edgetx-user-manual/summary_of_changes.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.