EdgeTX User Manual
v2.9
v2.9
  • EdgeTX User Manual v2.9
  • EdgeTX User Manual
    • Summary of changes since v2.8
    • Installing and Updating EdgeTX
      • Migrate from OpenTX to EdgeTX using EdgeTX Buddy
      • Migrate from OpenTX to EdgeTX using the Bootloader
      • Update from an earlier version of EdgeTX using EdgeTX Buddy
      • Update from an earlier version of EdgeTX using the Bootloader
    • User Manual for Color Screen Radios
      • User Interface
      • Manage Models
      • Model Settings
        • Model Setup
          • Internal / External RF
          • Trainer
          • Timer 1/2/3
          • Preflight Checks
          • Trims
          • Throttle
          • Enabled Features
          • USB Joystick
        • Heli Setup
        • Flight Modes
        • Inputs, Mixes & Outputs
          • Inputs
          • Mixes
          • Outputs
        • Curves
        • Global Variables
        • Logical Switches
        • Special Functions
        • Telemetry
          • Sensor Configuration Options
          • Common Telemetry Sensors
      • Radio Settings
        • Tools
        • SD Card
        • Radio Setup
          • Additional Radio settings
        • Themes
        • Global Functions
        • Trainer
        • Hardware
        • Version
      • Screen Settings
        • Widgets
      • Channel Monitor
      • Reset Telemetry
      • Statistics
  • User Manual for Monochrome Screen Radios
    • User Inteface
    • Main View
      • Reset
      • Statistics
    • Model Settings
      • Setup
      • Heli Setup
      • Flight Modes
      • Inputs, Mixes & Outputs
        • Inputs
        • Mixes
        • Outputs
      • Curves
      • Logical Switches
      • Special Functions
      • Telemetry
        • Sensor Configuration
        • Common Telemetry Sensors
      • Display
    • Radio Settings
      • SD Card
      • Radio Setup
      • Global Functions
      • Trainer
      • Hardware
      • Version
  • Translated User Manuals
  • EdgeTX: How-To
    • Contribute to the User Manual
    • Set-up wireless trainer with a Multi -protocol module
    • Use Bluetooth with EdgeTX
  • EdgeTX Companion
    • 🚧Companion User Manual
  • More
    • Additional Resources
    • Contributors
Powered by GitBook
On this page
Export as PDF
  1. User Manual for Monochrome Screen Radios
  2. Model Settings

Inputs, Mixes & Outputs

PreviousFlight ModesNextInputs

Last updated 2 years ago

To be able to support many different types of radio transmitters, EdgeTX uses a generic control data flow that can be applied to any radio transmitter. In this data flow, any of the radio's physical controls (sticks, switches, sliders, pots) can be mapped to an input in the software. These inputs can be directly assigned or combined with other inputs into a single mix. These mixes can be modified by applying weights, offsets, and curves and are then assigned a channel for output. Final adjustments to the control data are made (including subtrims, curves, endpoint, and center values) before finally sending the control data to the RF module. The flowchart below depicts a visual summary of this control data flow. Detailed information about the flow is provided in the following sections , , and .

Inputs
Mixes
Outputs
Control data flow