The **Radio Setup** screen is where you configure basic settings for your radio. It contains the following options:
**Date** - The current date. This date is used for the SD card log files.
**Time** - The current time. This time is used for the SD card log files.
**Additional Settings Buttons** - Additional configuration options for the named areas are available when selecting these buttons. More information about these configuration settings is on the next page - [Additional Radio Settings](/v2.11/color-radios/radio-settings/radio-setup/additional-radio-settings.md)
**Splash Screen** - Duration that the splash screen will be displayed.
**Startup Sound** - Toggles whether to enable/disable startup sound.
**Pwr Off delay** - The delay between when the power button is pushed and when the radio shuts off. The options are: **0s, 0.5s, 1s, 2s, 3s, 4**s. *It is recommended to set at least a 1s delay in order to prevent the radio from being shut off in the case of an accidental button press.*
**Power Auto Off** - If enabled, the radio with automatically power off after the configured amount of inactivity, if there is no RF module with active telemetry, or an active trainer connection.
**Power ON/OFF Haptic** - When enabled, the radio with use the vibration motor to give a haptic pulse when powering the radio on (indicating when the power button can be released) and when the transmitter is powering off.
**Owner ID** - Custom registration ID used only for users with FrSky ISRM/ACCESS modules.
**Country code** - Used by some RF modules to ensure adherence to local regulatory RF requirements. Options are **America, Japan, Europe.**
**Voice language** - Language for the voice pack. This setting and the voice pack folder on the SD card must match for the sounds to be played.
**Units** - Units of measure. Options are **metric** or **imperial**.
**PPM Units** - Level of accuracy for PPM values are displyed. Options are **0.-, 0.0 or us** **(μs/microseconds).**
**Play delay** (sw. mid pos) - The minimum time in milliseconds a switch must be in the middle position before a special function will get activated. This is used to prevent the middle position from being activated on a three-position switch when switching from low position to high position.
**USB Mode** - Sets the default action when a USB cable is plugged into the USB data port and the radio is powered on. Options are: **Ask**, **Joystick**, **Storage**, and **Serial**.
**Hats Mode:** how the hat switches will function (***NV14, EL18 and PL18/PL18EV only***).
* **Trims** **only**: The Trim hat switches will be used to adjust the trim values only.
* **Keys only**: The Trim hat switches will be used to navigate the menu options (as described below)
* **Switchable**: Trim hat switch functionality can be changed between **Trims** and **Keys** on-the-fly.
**Rotary Encoder Mode** - Set to **Normal** by default. The **Inverted** option reverses the direction of the roller.
**Default Channel Order** - The default channel order for new models and the trainer screen. The letters stand for: **A** = Aileron (Roll), **E** = Elevator (Pitch), **T** = Throttle, **R** = Rudder (Yaw). Changing this setting does not affect existing models.
**Mode** - The stick mode that will be used for the transmitter. Defined by what actions the left stick takes. The options are:
Option
Left stick H
Left stick V
Right stick H
Right stick V
1: Left = Rud+Ele
Rudder (Yaw)
Elevator (Pitch)
Aileron (Roll)
Throttle
2: Left = Rud+Thr
Rudder (Yaw)
Throttle
Aileron (Roll)
Elevator (Pitch)
3: Left = Ail+Ele
Aileron (Roll)
Elevator (Pitch)
Rudder (Yaw)
Throttle
4: Left = Ail+Thr
Aileron (Roll)
Throttle
Rudder (Yaw)
Elevator (Pitch)
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://manual.edgetx.org/v2.11/color-radios/radio-settings/radio-setup.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.