# Model Setup

<div align="center"><figure><img src="https://369069151-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F2n2y0XsJcrhXt3asceP0%2Fuploads%2F6EBGAOcD2iiLW80eJ96M%2Fcolor_model_setup_plane.png?alt=media&#x26;token=a011bea7-9fb0-4e3b-8b0f-2c5af461ad79" alt=""><figcaption><p>Model Setup tab under Model Settings</p></figcaption></figure></div>

The **model setup** page is the default page for model settings and is where you start to configure your model. It contains the following settings:

#### Model name

Enter the desired name for the model. The maximum number of characters is 15.

#### Labels

Here you may assign a label from your defined label list.  By default, the model label will be **Unlabeled.** More information on creating labels can be found on the  [select-model](https://manual.edgetx.org/v2.11/color-radios/select-model "mention") page.

#### Model image

When the folder icon is selected, a window will pop up allowing you to select an image file from the images folder on your SD Card.

{% hint style="info" %}
To avoid performance issues, the model image size should not exceed 192 x 114 pixels. For more information on model image requirements, please see the **Images** portion of the [SD Card](https://manual.edgetx.org/v2.11/color-radios/radio-settings/sd-card) section.
{% endhint %}

{% hint style="info" %}
<https://www.skyraccoon.com/> has a large repository of free image files that can be used with EdgeTX.
{% endhint %}

{% hint style="info" %}
RF Modules, Trainer and Timers that are enabled will show as highlighted on the Model Setup screen.
{% endhint %}